Plumbing is a very important part of any building. It provides clean water, drains dirty water, and allows for the delivery of gas and electricity to power appliances in your home or business. This blog post will show you how to add plumbing to your garage!

4 Ways How to Add Plumbing To Garage

There are 4 ways you can try to add plumbing to your garage.

1) Drain the water tank

This is one of the easiest ways to add plumbing to your garage. All you have to do is drain out all of the water from a designated location for the pipes underneath are exposed so you can connect them with another pipe that will take over its function and add an additional faucet or two.

Just make sure to consult the local codes for this kind of project and then follow them accordingly.

For example, you need to have a clear working space around the tank that is at least two feet wide in order to drain it properly without creating any mess or hazard nearby.

Also, be aware of your own safety and environmental issues as well since you don’t necessarily want water spilling out onto the soil, which would eventually create erosion problems down the line. So take care when completing tasks such as these, especially if they are going into sensitive areas where quality work will really matter later on.

2) Connect with a manifold

This is another way to add plumbing to your garage. All you have to do is connect the drain with an exterior water source such as under the sink in your house and then use a manifold that will help distribute the flow of water evenly throughout all of those faucets or spigots as needed.

The benefit here is that you can even include more than one tank if necessary for this kind of project, but remember that each hose has its own set amount of pressure behind them.

Be aware of how much weight they are bearing at any given moment and their chances for clogging up or causing other issues down the line when you want everything working properly without needing too many repairs later on. Be smart about this kind of work since it could save you a lot in the long run, especially if you are trying to add plumbing to your garage.

The manifold itself should be made from either plastic or metal and then connected together by using galvanized screws that will allow for easy access when additional repairs need to happen down the line without needing an expensive plumber all over again.

3) Install a sump pump

This is another way to add plumbing to your garage. You can simply install a separate drain into an available space underneath the floor of your garage and then connect it with either a hose or some kind of tube that will allow for easy transfer down below when needed.

Just be sure not only about its location near any other water sources such as rain runoff but also where the best place would be in order to make this work smoothly without needing too much consideration later on, especially if you want everything working properly before winter comes around.

These kinds of pumps require specific conditions in order for them to work correctly and save you from having major problems in the future, like flooding, which could take up even more time than doing this kind of project in the first place.

4) Add a second water source

This is another way you can add plumbing to your garage. You simply need to find an already existing water pipe that runs into the house and then connect it with either a new faucet or two for this kind of project in order to make sure everything flows correctly without needing any additional problems later on when trying to complete all kinds of tasks such as these.

Just be aware of where the pipes run through before adding anything extra since they might not exactly coincide if there are too many changes being made at once, which could lead to major issues down the line when something goes wrong and needs immediate attention instead of having time whenever you want it most especially around holidays or other during the year where people need their homes to be fully functional without any problems.

So when you are adding plumbing to your garage, just make sure that everything is done right the first time around since it will only save you in the long run instead of having additional expenses down the line whenever there could have been preventative measures beforehand which would also help lessen costs overall for this kind of project.

Those are the 4 common ways on how to add plumbing to the garage. We hope that this article has been helpful for you. You can always check out our site to learn more about plumbing. You can also check our post about plumbing stoppage and the plumbing above-ground pool.