Running the toilet is one of those things that we all do, but not many people know how to install a twist and set toilet flange. We’re here to help you out! There are 7 simple steps for installing this type of toilet flange, which will make your life much easier. Follow these steps and you’ll be able to get the job done in no time at all.

How to Install a Twist and Set Toilet Flange

Step 1: Choose the Correct Size

When purchasing a twist and set toilet flange, be sure to select the size that corresponds with your current pipe size. This is important for proper installation.

Step 2: Clear the Area

Before beginning the installation process, be sure to clear any debris from around the area where you will be working. This will help ensure a safe and successful installation.

Step 3: Apply Teflon Tape

Once you have selected the correct size flange and cleared the area, it is time to begin installing it. Wrap a layer of Teflon tape around the threaded end of the pipe. This will help create a watertight seal when installed.

Step 4: Insert Pipe into Flange

Carefully insert the pipe into the twist and set toilet flange. Be sure not to damage the gasket in any way.

Step 5: Tighten Set Screws

Tighten the set screws on either side of the flange until they are fully tightened. Do not over-tighten, as this could cause damage to the flange or pipe.

Step 6: Apply Silicone Adhesive

Once the set screws have been tightened, you are ready to apply a bead of silicone adhesive around the top edge. This will help prevent leaks and further damage once installed.

Step 7: Clean Up

Once all parts have been correctly assembled and secure, clean any excess adhesive from hands or tools using water and soap. Allow the area to dry before flushing toilet for the first time!

Tips When You Are Installling a Twist and Set Toilet Flange

Tip 1: Wear Gloves

When you are installing a twist and set toilet flange it is important that you wear gloves. Installing this style of the drain will require some cutting into the flooring under your bathroom sink, which could be dirty with shards of broken tile or other debris. 

It’s also possible (although unlikely) that there may even be water damage in the area where you plan to install the new drain. You want to make sure both yourself and everyone else in your home is protected from any contaminants like bacteria, mold, mildew, etc.

Gloves won’t protect against everything but they can prevent most harmful particles from getting on your skin which can help minimize the risk for sickness later down the road if someone were to come into contact with them unknowingly.

Tip 2: Prepare Your Work Area

You’ll need a level surface to complete the installation of your new twist and set toilet flange.  In order for you to have a stable area, it’s best if this space is free from clutter so no one accidentally trips over anything laying around while trying to move about.

If necessary, clear out any big items that can be moved or relocated in an effortless manner. You should also make sure there isn’t going to be anyone coming through during your time working on the project as well because their presence could prove dangerous without warning when they come into contact with sharp tools used for cutting tiles etc.

Ultimately, ensuring both yourself and everyone else is safe comes down to preparation beforehand which includes clearing out whatever obstructions are in your way.

Tip 3: Ensure That You Have Enough Tile and Flooring

A twist and set toilet flange will require that you cut some tiles out of the floor around your bathroom sink.  If you don’t have enough time, it’s time to go get more so everyone can be safe while working on this project.

Installing a new piece of the drain pipe is going to take up space in your wall cavity or under your floor so make sure there is enough room for everything else which means having extra tiles ready just in case they’re needed.

This also applies if someone wants to do any additional remodeling work like replacing old faucets, etc. These projects may affect how much tile and flooring there is available. If not, then you could run into problems later down the road when you least expect it.

Tip 4: Preparing The New Drain Pipe And Flange

Before actually installing your new twist and set toilet flange, there are a few things that need to be prepared beforehand so you don’t risk getting cut or injured.  For instance, make sure both your old drain pipe is removed along with all of its fittings as well as whatever was attached at the other end like an overflow tube, etc.

These pieces should have been disconnected before starting this project, but if they weren’t, then now would be a good time for everyone’s safety because cutting into these different pipes can prove dangerous without proper precautions being taken first.

Once everything has been completely removed from under your sink, take out the new twist and set toilet flange, and give it a good cleaning with some freshwater. This will help remove any debris or dirt that may be on the surface before installation.

These are four simple tips that everyone should keep in mind while installing a twist and set toilet flange. By following these easy steps, you can help ensure both your safety as well as the safety of those around you.

Remember to always be prepared before starting any home improvement project and if there are any questions or uncertainties, be sure to consult with a professional beforehand. Stay safe!

Suggested Post

• https://captaintool.com/how-to-mount-a-ceramic-towel-rack-in-drywall/How to Mount a Ceramic Towel Rack in Drywall: 8 Basic Steps