How to Change Welding Helmet Batteries

Share
how to change welding helmet battery

Welding helmet batteries are a necessary component of your welding gear. It is what powers the light on your helmet so you can see what you are doing. However, batteries only last so long before they need to be changed. In this blog post, we will show you how to change welding helmet batteries safely!

What Kind Of Welding Helmet Needs Batteries?

Welding helmets that usually need batteries are those helmets that come with an LCD display. It is also necessary to have a battery in the helmet if there are LED lights on it as well.

Battery helmets are very beneficial because it allows the welder to see in dark places where other helmets do not work. Moreover, it also helps protect the welder’s eyes from high-intensity light, which can harm their vision.

How To Change Welding Helmet Batteries Properly?

The batteries for welding helmets come in different shapes and sizes, but they usually fit into one of three types of receptacles: Round, Square, and Octagonal.

To change welding helmet batteries, you need to have the correct replacement battery for your specific type of receptacle so you can place it inside without any issues. It does not matter what kind of a welding helmet you use specifically because all helmets come with their own manual that provides users with information on how to replace their parts, including batteries.

Step One

Remove the helmet’s face shield and turn it around so that you can see its back. Ensure that the power is off, and then detach the battery cable.

Step Two

Unscrew the battery holder from where it is attached in order to separate itself from the welding mask. Keep the battery holder aside.

Step Three

Insert new CR2032 or CR 2054 cell batteries into your specific type of receptacle. Make sure to put it properly so that it can stay in place.

Step Four

Put the battery holder back into place and screw it in tightly to secure the batteries in their proper position.

Step Five  

Turn your helmet around so that you can see its front again, replace your welding face shield, and voila! You have successfully changed a welding helmet battery! Changing the lens, batteries, and filters in your welding helmet is very easy to do. You just need to do it properly and keep your helmet in good condition for it to work properly!

CR-2032 And CR 2054

CR is an acronym for cylindrical battery. These types of batteries are round and make up a majority of the welding helmet’s power source. You can use double A or triple A alkaline cells, but most helmets come with rechargeable nickel cadmium or lithium ion options that have no memory effect.

CR-2032 and CR 2054 are the same types of batteries that you can use for your welding helmet power source because they have a voltage of around three volts each, which is more than enough to run any type of face shield on the welding mask. In addition, these cells also come in different sizes so it should not be hard to find one that fits your specific needs!

Types Of Welding Helmet Batteries

There are several types of welding helmet batteries that you can use.

Alkaline Battery

This type of battery is the most common one to use for welding helmets because it has a long life and is very affordable. However, you will need double or triple A batteries in order to power your helmet, which can be inconvenient, especially when you are out of the shop.

Lithium Battery

This type of battery provides more voltage than an alkaline cell and is more powerful, but it costs a lot more.

Rechargeable Battery

This type of battery can be bought in either nickel cadmium or lithium ion versions and lasts forever without needing to change the cells constantly. However, you will need the correct charger for your helmet if you decide on using this option because there are different types of chargers.

How Often Should Welding Helmet Batteries Be Changed?

When it comes to changing your welding helmet battery, you should check the manual so you can determine how often to change the cell inside. In general, though, most batteries will last for several hours or days before they need to be replaced.

If the power on your face shield is starting to look weak and dark, then you need to change your battery as soon as possible. In addition, always have a spare set of batteries inside the shop so that if one dies out while welding, you can easily replace it and continue with your work without any issues!

Remember to use your helmet properly and always check the user manual to learn how to change the welding helmet batteries.

Share

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *