Live wires and screwdrivers are not a good combination. If you don’t want to get an electric shock, then you need to learn how to check the live wire with a screwdriver. There are ways to check if there is electricity in the wire. Here we will show 6 different methods on how to check live wire with screwdriver!

How to Check Live Wire with Screwdriver

Here are the 6 steps to check if the electrical wire is live or not:

Step 1: Make sure you are working with an isolated circuit

The first thing you need to do is make sure that you are working with an isolated circuit. Not only does this protect yourself, but it also protects others who might be nearby and could come into contact with the wire that you testing.

Step 2: Put on safety gear

It’s important for several reasons to put your safety equipment on before beginning work on any electrical project, especially when checking live wires.

You will want some things like gloves, goggles or glasses, a long sleeve shirt, long pants, and maybe even shoes that cover up most of your feet for protection from injury if something happens while working around electricity. It may sound silly, but it’s better safe than sorry!

Step 3: Ready your screwdriver

Your screwdriver should be nothing too big or small for this job. You just need to make sure that it has a sharp and sturdy tip on the end of it so you can test your wires to see if they are live or not.

Step 4: Insert your screwdriver into one of the holes near where electrical wire attaches

Once you have put all your safety gear on, made sure that you are working with an isolated circuit, then its finally time to insert your screwdriver into one of the two tiny holes next to where the electrical wire is attached which will tell us if our wiring is live or safe!

Step 5: If the screwdriver lights up then your live!

If you see a spark of light when inserting it into one of those two holes next to where your electrical wire is attached, this means that it’s actually an active circuit.

This should be enough proof for you to know whether or not the wiring in question is safe or not. You can now access your wires with confidence because if they are connected properly, there won’t be any danger around them, making this step five pretty easy!

Step 6: If no sparks are seen then switch off all power supplies and check again

Finally, after inserting the screwdriver into both outlets next to where our electrical wire attaches and seeing no reaction from either hole within these two sockets whatsoever, we will know that the wiring is safe and we can access it safely as well.

However, if you do see sparks of light when inserting your screwdriver into either one of those two outlets, then this would mean that there is still power going through them which means that you need to switch off all power supplies before trying again, just in case!

Now it’s time for you to go apply these six easy steps on how to check live wire with a screwdriver onto your electrical project at hand and make sure everything is turned off properly, so no mishaps happen along the way!

Safety Tips When Checking Live Wire

1. Never assume that a wire is not live because it has no power.
2. Don’t touch the exposed ends of two separate wires together to see if they are “live.” This can be dangerous! The electricity may pass through your body and you could die from electrocution, even though there was no spark or shock felt immediately before touching both wires. You don’t know whether these two wires will create enough energy once combined to harm you, so just avoid doing this altogether
3. keep yourself safe by never checking for voltage with exposed metal parts like screwdrivers or pliers . Even better, plug in an appliance such as a lamp (which would only have one exposed end) into the outlet to use it as a voltage detector.
4. Always UNPLUG the appliance or electronic device before testing for current
5. If you are not an expert when it comes to electricity, it’s best to call a licensed electrician.

Suggested Post:

• How to Build a Gas Air Compressor: 11 Basic Steps
• How to Cut Pressure Treated Wood with a Miter Saw: 5 Quick Steps