Cutting a railroad rail is a dangerous job. It’s not something you want to do if you don’t know what you’re doing or have any hesitation about asking for help from someone who does.

In this article, we’ll go over 7 easy steps that will show anyone how to cut a railroad rail in an efficient and safe manner.

7 Steps On How To Cut a Railroad Rail

Step One: Put on protective gear

Gather materials needed for this project. When working with heavy equipment, it is important to put on all necessary protective gear before beginning the task at hand. This includes but is not limited to: safety glasses or goggles, ear protection, boots that cover your ankles, and sturdy jeans that protect against flying debris.

Step Two: Mark where you will be cutting

Using a measuring tape, measure the length of rail you will need to cut. Mark it with a piece of chalk or marker so that no one runs over it and gets injured by flying debris.

Step Three: Set up your saw

Using an angle grinder set on low speed, attach your grinding disc securely onto the power tool using safety gloves. The metal sparks from this process can cause serious injury if not used properly as well as potentially damage nearby objects such as cars parked nearby.

This step is highly recommended to be done outdoors due to potential messes made during the cutting process being created indoors which makes cleanup difficult without proper ventilation systems installed in homes or buildings where people may occupy at certain times of the day even though there may be little activity going on at the time of use.

Step Four: Cut along your marked line with a slow and steady hand

Cutting through metal can be difficult depending on how thick it is, so cut slowly at first to avoid breaking the disc or motor if possible.

Keep in mind that this project should not take more than five minutes tops due to safety precautions listed above for both you and surrounding areas, such as cars parked nearby which may get damaged by flying sparks during the cutting process.

If using an electric saw, make sure there is ample space between where you are working and any other objects near enough to create potential fire hazards from sparking debris hitting flammable materials such as dry grasses or leaves closer towards roadsides where children might play without adult supervision for example.

Step Five: Clean up the debris and dispose of it properly

Once cut, pick up any loose pieces that may have fallen on surrounding areas such as roads or sidewalks. Dispose them into a plastic garbage bag with other metal scraps you might find lying around for easy clean-up later without creating an eyesore in public spaces where people walk by frequently.

Use caution when disposing of sharp objects like railroad spikes which can puncture even thick garbage bags so they don’t create a risk to trash collectors who empty bins and dumpsters daily at scheduled times depending on your location within town or city limits.

Step Six: Put back together if necessary

If there is another rail section attached to this one, reattach them using the track pins provided by the manufacturer. These are small nails with a head on one side and a pointy end that can be hammered into place once the rail is in its proper location after being cut.

Step Seven: Sand down any rough or sharp spots if necessary

If there are jagged edges of metal that may cause injury, sand them down using an electric sander set to low speed unless you prefer doing it by hand then carefully use the file to smooth out areas where hands might come into contact when carrying heavy railroad track sections back and forth from storage space for example.

Be sure to wear protective gloves while filing against the skin because this process creates small metallic particles which can get lodged underneath fingernails causing problems later such as infections so wearing safety equipment is highly recommended during the entire project including cutting itself due to potential injury from flying sparks during the process.

Cutting a railroad track is both simple and safe as long as precautions are taken, such as wearing protective equipment like safety glasses, gloves, and clothing that will not catch on fire easily from sparks flying off the metal during the process.

Suggested Post:

• How to Connect Two Air Compressor Tanks: 6 Steps
• 4 Quick Methods: How to Find Aluminum Wall Studs