How to Find Aluminum Wall Studs: The 4 Quick Methods

Share
4 Quick Methods How to Find Aluminum Wall Studs

Wall studs are an important component of your home. They act as the foundation for the drywall, insulation, and electrical wiring in your home. Without them, you would not be able to build or repair any walls in your house!

If you need advice on how to find aluminum wall studs in your house, this blog post is for you. Today we will discuss 5 quick methods that will help you on how to find aluminum wall studs!

What Is The Use Of Aluminum Studs?

Aluminum studs are an inexpensive and simple to use option for those who need a solid, reliable wall. These studs can be used in any project that needs support, structural or otherwise.

They’re especially useful when walls need reinforcement, such as garage doors, attached garages, built-in shelving systems, and more because they won’t rust as steel fasteners will! Aluminum is also lightweight, so it doesn’t add much weight to your projects, making working with them easier on the back.

What Are The Different Types of Wall Studs?

There are two types: Threaded and Pinned:

Threaded studs have screws driven into both ends of each side, leaving space in between for nails, bolts, or other hardware pieces to attach to the studs. Pinned aluminum wall studs have a screw driven into one side and a metal pin driven into both ends, leaving no space between hardware pieces for nails, bolts, or other fasteners to secure onto them.

What Are The Different Sizes and Thicknesses of Aluminum Wall Studs?

The most common sizes:

12″ (30.48cm) width x 16″, 24”, 28” or 32” lengths. These are the most popular with home builders as they can be used in a variety of projects such as walls, ceilings, built-in units, and more! Length is determined by how many studs you need to cover an area with two pieces per foot length needed for standard construction applications.

14″ (35.56cm) width x 20″, 26”, 30” or 36 inches long. These aluminum wall studs work well for garage door installation due to their larger size and strength.

16″ (40.64cm) width x 16″, 26” or 32” lengths. These are the largest aluminum wall studs that work well for heavy-duty projects such as garage doors, built-in units, and more.

The larger size provides extra support against sagging over time! Depending on your project, you should use two pieces per foot length used to secure standard construction applications.

How to Find Aluminum Wall Studs

These 4 methods work well for finding aluminum wall studs:

Method One: Use a stud finder

The basic and easiest way to find an aluminum wall stud is by using a simple stud finder.

Method Two: Use the Knot Method

This method for finding aluminum wall studs works great in tight, narrow spaces where it’s hard to use a handheld device or when you just need something quick and dirty. Simply tap around on different areas of the drywall with anything that has some weight behind it. Even your finger can work!

Once you hear tapping sounds rather than thuds, there are probably screws up against that area which means they’re likely fastened into seams between walls instead of individual support beams. This method also works well if your metal frame is affixed onto already-mudded drywall because tapped knuckles will have more solidity than a typical stud finder.

Method Three: Use a Magnet

A magnet can be a really helpful tool for finding aluminum wall studs. Simply attach the metal to some string and hold it up, near, or on top of walls while you walk around your space. Anything with an iron content will attract the magnet, so if there’s a screw sticking out from somewhere in that area, it will get pulled over towards where you’re standing.

Method Four: Watch for Flashing

This method works best when trying to find aluminum wall studs along exterior walls because flashing is often installed at seams between outside masonry bricks/stones and inside drywall panels.

If you see any kind of patchwork going on around the base of window frames or doorframes (or anywhere else), then there’s a good chance that metal flashing was used to help keep wall and ceiling materials sealed together.

There are four quick methods to find aluminum wall studs. Remember to use a stud finder, the knot method, and watch for flashing to locate them in tight spaces. Finally, use a magnet!

Suggested Post:

Share

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *