How to Cut Pegboard by Hand: 4 Easy Steps

Share
Pegboard Cutting How to Cut Pegboard by Hand

Pegboard is a surprisingly versatile material that you can use to store all sorts of items. It’s also an excellent way to organize your garage or workshop. You may not know this, but pegboard can be cut by hand! Read on for instructions on how to cut pegboard by hand safely and easily.

How to Cut Pegboard by Hand

Here are the steps to cutting pegboard by hand:

Step 1: Determine the size

The first thing you need to do is to drill the pegboard holes. You will need to measure out easily-accessible points where you plan on cutting and draw it using a marker so that you can drill through your board at these locations. This is essential because drilling directly into metal tends to dull bits and makes them difficult for the next step.

Step 2: Drill the holes

Once you have marked out where your pegboard will be cut, it is time to drill through the metal using a power drill with an appropriate bit for your project’s material. Use these steps if you plan on cutting wood or plastic pegboards since they are much less likely to cause problems when drilling than steel or aluminum boards.

You can also use special hole saws designed specifically for making pegs in order to start off small and then expand them so that there is enough space inside of each one for fitting larger items like screws, nails, hooks, etc., but keep in mind that these tend to break down rather quickly.

Step 3: Cut the board to size

Once you have drilled holes into your pegboard, it is time to cut out each section that has been marked off. Use a metal cutting saw for this step in order to get an even and smooth edge without too many jagged edges or lines visible on its surface; both of these features can lead to tools falling behind them when placed inside of them so be careful with what kind of scissor you use!

Additionally, if there are any sections where not enough space was left between two pieces after drilling, you may need additional pegs since they tend to expand once they’re inserted into their designated hole which would cause some issues when trying to hang certain tools.

Step 4: Place the pegs into their holes.

Finally, it is time to place your new pegboard onto its mounting system! This may take some trial and error, but once you have worked out where each of them should be placed in order for each section to fit together correctly with any other pieces you’ve added or left empty, go ahead and hammer them all down securely so that they are snugly fitted inside of their designated hole without coming loose too easily.

Pegboard cutting by hand can be tricky if not done properly right from the start due to how easy it is for bits and tools to fall behind surfaces when there isn’t enough room between sections which leads us to believe that this method may not be the best option for those who are looking to expand their tool collection.

Suggested Post:

Share

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *