How to Increase Blade Speed on a Riding Mower: 6 Tips


How to Increase Blade Speed on a Riding Mower

It is important to know how to increase blade speed on a riding mower. Not only does this make cutting the grass faster, but it also increases the lifespan of your blades.

When you are looking for ways to improve your lawnmower’s performance, there are many things that you can do at home without having to spend any money! Here are some simple tips that will help you get started.

How to Increase Blade Speed on a Riding Mower

Here are the 6 tips to increase the speed of your lawnmower blade:

Tip One:  Change Your Blades

If your blades are dull, not only will they take longer to cut the grass but you’ll also be forcing it through tired and worn down blades. Dull mower blades can increase your lawn’s drying time as well as damage the grass plant itself, leaving brown or discolored patches of dry turf.

You should change both blades at least once per year and sharpen them every few months (you can do this yourself or take it to a repair shop).

Tip Two: Adjust Your Deck Height

Raising your deck height will increase the speed of your mower blade. However, you’ll need to make sure that there’s enough room for airflow beneath the blades so they don’t get choked off while spinning at such high speeds. You may find that cutting just an inch higher than normal works well in most circumstances.

If you’re dealing with thicker grass, consider lowering your lawn mower blade height instead, as this will give it more access to sunlight and nutrients, which ultimately means faster growth and easier cutting later on down the road.

Tip Three: Clean Underneath Your Blade

Most people don’t give a lot of thought to what’s going on underneath their mower blade, but it can have just as much of an effect on the speed at which your cut grass is being turned into mulch.

If you’ve got rocks or other debris stuck beneath your lawnmower blade, not only will they increase drag and slow down the entire process but also cause more strain on both your blades and motor in general. Take some time to make sure everything under there is clear before heading out for that next round with the mower!

Tip Four: Adjust Your Throttle Lever

To open up this throttle even further (and thus increase the speed of your blades), simply push it all the way forward until it touches the metal ridge at the bottom of your mower.

In order to slow things down a bit, simply push it back towards you until you hear and feel it click into place again.

You’ll see this same type of action on almost every lawnmower out there so don’t be afraid to experiment with this setting during different stages throughout your yard work!

Tip Five: Get Rid Of The Grass Catcher If Necessary

Some people might tell you that grass catchers are here for a reason stopping clippings from flying all over their freshly cut lawns as they go along. However, if being able to let those blades spin faster is something that’s important enough to you, then dropping or removing your grass catcher is definitely a good way to go about achieving that.

This will allow the grass to be thrown into your yard more quickly and give you an easier time when it comes down to bagging up those clippings at the end of each mowing session!

Tip Six: Keep Your Lawn Mower Blades Sharpened

Sharp lawn mower blades can make a huge difference in both safety and productivity on any sized piece of land, so it’s important for people everywhere to keep their equipment as sharp as possible.

There are some who think they don’t need professional help with this type of maintenance but there’s no shame in taking your equipment over to one of those local riding mower shops where technicians know exactly what needs fixing based on just a quick glance at your equipment!

Keep those mower blades as sharp as possible, and you’ll find that they’re not only working faster but safer as well. Read this blog on how to sharpen your mower blades.

Tip Seven: Add Some Weight to Your Lawn Mower Deck

One of the quickest ways for a riding lawnmower with a regular-sized deck to pick up some serious speed is by adding weight on top of it.

Whether this comes in the form of sand, gravel, or another material entirely isn’t going to make much difference so long as there’s enough above the wheels themselves. This will help keep things nice and stable during operation while also increasing blade speeds across all four corners!

If you’re looking to get your lawnmower blades spinning faster, don’t hesitate to give these tips a shot! Remember that it’s always best not to take any risks while operating this machine, so just be safe, have fun and enjoy the fruits of all your labors in no time.

Suggested Post:



Submit a Comment

Your email address will not be published. Required fields are marked *