Toolboxes are great for storing tools and other items in your truck. But, there may come a time when you want to remove the toolbox from the vehicle.
There are several ways you can go about this task, depending on whether or not the toolbox is installed with bolts or simply sitting on top of brackets.
This blog post will provide 5 steps that will help on how to remove the toolbox from the truck easier!
How to Remove Toolbox From Truck
Step One: Park Your Truck On A Level Surface
Find a place to park your truck where it is flat and level. If the toolbox has been on for a long time, you may want to elevate one side of your truck with bricks or blocks in order to prevent any damage from occurring due to uneven tire wear.
Step Two: Align The Locking Mechanism
Before removing the bolts that hold the toolbox onto the backside of your truck bed, align all three locking mechanisms so they are directly facing each other.
This will ensure that none of them get stuck underneath anything else on their way out when you remove them. It also makes it easier for replacement if needed later down the road because everything will be lined up properly first thing!
Step Three: Remove Bolts
The two small bolts on the side of your truck bed are what you need to remove in order to get the toolbox off. Using a wrench, loosen both sides but do not take them completely out just yet.
Step Four: Remove The Back Bolts
There is also one back bolt that holds down each corner of the toolbox itself. If needed, you will want to use an extension and then place it into position with a socket or adjustable wrench, depending on which type you have at home already. Each hole should be slightly larger than the width, so working with such tight spaces makes getting things done much easier!
Step Five: Remove Tool Box From Truck Bed
Now that everything else has been loosened up, you will be able to wiggle and pull the toolbox right off of your truck bed. If you have any trouble, just go back around with all tools again in order for them to loosen up a bit more until it pops right off!
Step Six: Re-Install Toolbox
Once everything is clean underneath where the box was sitting, you can begin putting things back together by reversing these steps one at a time. You can also check this blog to know how to reinstall your truck toolbox.
Remember not to over tighten when using the wrench or run the risk of damaging something, so take it easy, especially on those bolts holding down each corner because they are smaller than what came out originally.
Now head out for some awesome adventures with peace of mind knowing that your new storage area has been fully secured.
Why People Use The Truck Tool Box
The primary use of a truck toolbox is to add more storage space. Whether you need it for tools, equipment, or other extra items, this type of accessory provides the ability to take on projects and tasks while out in remote environments where options are often limited.
With many shapes and sizes available, there is one that will suit your specific needs perfectly! From mechanics who have an assortment of wrenches they work with daily to contractors working outside all day long laying flooring or putting together different types of structures, everyone can benefit from having this kind of organizational system nearby when needed most!
You never know what kinds of things could be hiding underneath, so always check before proceeding just in case something might be stuck down below, causing resistance. Having a truck toolbox enables you to go about your day without having to worry whether or not what you need will be readily available and accessible on hand at all times.
Once it is installed, many people find that they utilize the extra space weekly, which really helps them out with their daily activities! Whether working on small projects around the house, taking care of some maintenance issues outside by checking fluid levels such as oil or coolant, or even utilizing those items needed for automotive repairs, using this accessory makes life easier in every way imaginable!