6 Simple Ways on How to Slow Down a Drill Press

Share
6 Simple Ways on How to Slow Down a Drill Press

If you are looking for ways to slow down your drill press, there are many different methods that can be applied. This article will discuss six of the most popular ones and provide a brief overview of how they work. 

You may not know it but slowing down a drill press is actually very easy! Simply try one of these techniques and see which one best suits your needs.

How to Slow Down a Drill Press

There are times when you need to slow down a drill press. This is because there may be too many materials that can cause jamming, or it might just not go as fast as necessary. There are a few ways you can slow down your drill press.

1) Change the spindle speed

The first way to slow down your drill press is by changing its speed. It’s easy and simple, but it can be time-consuming if you don’t do this at the beginning of each project. Just push a button or slide a lever until you get to an appropriate speed for what you need.

You usually want to go slower than usual because there are times when too much power will cause problems with materials that could ruin them completely. This method might not work well, though, depending on how big the difference in speeds between settings is, so keep reading below for other options!

2) Use the clutch

This is a great option to slow down your drill press because it’s simple and easy. Most models have this feature, so you shouldn’t run into problems with finding it on yours. 

There are times when too much power can damage materials or cause jams, so having this extra safety measure will help keep things working each time properly! If you want something that works well but isn’t as expensive, try using oil instead of changing speeds, which we’ll get below.

3) Use a speed reducing pulley

This is another way to slow down the drill press that requires you to spend extra money or time. You can just swap out the original pulley for one with fewer teeth if need be! This will decrease the overall spindle speed and make it go more relaxed, making it perfect for use when materials may break or jam otherwise.

This option usually works well because all you have to do is replace the old belt and pinion with two new ones provided by whoever manufactured this method of slowing down your drill press in the first place, so there’s no problem getting them together as other options might give. 

The only downside we see here is whether or not you know how to work on these sorts of machines, but it shouldn’t be too difficult to figure out if you do!

4) Use a speed reducing belt

This method of slowing down your drill press is very similar to the last one in that it requires changing two pieces instead of just swapping out pulleys. All you have to do is replace them with belts that are thicker and therefore slower!

Just like before, this will cause everything below the machine itself (speed reducer) to not be as fast which makes for an easier time when using materials. This option can also work well if you know how to fix up machines, so try going with whichever seems best depending on what’s most affordable or easy, but either way should work fine!

5) Use hydraulic flow

This method of slowing down your drill press is one that can be expensive, but there are reasons why it might just be worth the price! You’ll have to make sure you use oil instead of water because the latter won’t work, which means this option isn’t always great depending on what materials or projects are being used.

It’s usually better if the pump has a manual speed setting since some will go by their own accord, which can cause problems with jamming and ruining certain things. 

This method only works best when using thick pieces with no risk of breakage otherwise everything could end up ruined completely, so keep reading for other options if that doesn’t sound like something you’d want to deal with!

6) Use a brake

This is the best option for slowing down your drill press because it’s easy and won’t cost you anything! There are times when using too much power can ruin certain materials, so this method will help keep that from happening by stopping completely.

This simple little machine will stop everything, making for an easier time with most projects without worrying about jamming or breaking things. 

The only downside we see here is whether or not you know how to make one yourself,  which might be tricky if done incorrectly, but there are plenty of tutorials online available on making them work properly!

Conclusion

In conclusion, there are many ways on how to slow down a drill press, and each option has its own benefits and drawbacks depending on what is being used. We really think you should keep in mind that speed-reducing belts or pulleys will work best with thicker pieces since they won’t break as easily, while fluid flow can be expensive but works well for any material!

If this doesn’t sound like something you want, all you have to do is make one yourself using simple materials if possible, which can save money anyway! 

No matter what, none of these options should cause problems when slowing down your drill, so try them out today and see how it goes from there! Make sure to always read up on the other options available to you as well before deciding what works best for your needs!

If you are interested, you can also read our post about drilling through a file and drilling a hole in brasshttps://captaintool.com/how-to-drill-a-hole-in-brass/.

Share

0 Comments

Submit a Comment

Your email address will not be published.