- Ryobi 18V Volt Cordless Grease Gun P3410
- What We Like About Ryobi 18V Volt Cordless Grease Gun P3410
- How To Use Grease Gun?
- Suggested Post
Ryobi 18V Volt Cordless Grease Gun P3410 is a great option for those looking to save time, money and effort.
The Ryobi 18V Volt Cordless Grease Gun P3410 can be used at home or on the job site because it’s strong enough to be used in any environment. It comes with a quick-release feature that makes changing your grease easy and fast so you don’t have to worry about getting dirty while doing the work!
Ryobi 18V Volt Cordless Grease Gun P3410
- For optimum efficiency, the pump has an 8.0 GPM flow rate and 10,000 PSI pressure capability.
- Maximum durability is assured by the stainless steel grease tube.
- The Largest 18-Volt Tool System in the World
Designed for the toughest grease fittings, the Ryobi 18V Volt Cordless Grease Gun P3410 delivers 10,000 PSI of pressure and up to 7.5 oz./minute of flow rate. With an on-board LED light and 30 in. flexible hose, this gun is perfect for reaching tight spaces.
Pump up to 19 grease cartridges per charge, and gauge how much grease is left in the tube with the plunger rod markings. Maximum pressure of 10,000 PSI powers through most clogged grease fittings while the max flow rate of 7.5 oz./minute increases work efficiency.
What We Like About Ryobi 18V Volt Cordless Grease Gun P3410
3 ft Hose
This 3 ft Hose model also comes with a 3 ft hose, making it much easier to use when you’re crawling around under your tractor or implement. No more messy cords getting in the way – this gun is completely cordless, so you can take it anywhere you need to go. With its powerful motor and variable speed control, the Ryobi P3410 is perfect for any grease application.
Easy to Use
With the Ryobi 18V Volt Cordless Grease Gun P3410, you’ll never have to worry about being too far from a grease fitting again. This handy tool is easy to use and fits snugly onto all grease fittings, so you can get the job done quickly and easily. It’s also very sturdy, making it perfect for small farms, garages, or homesteads. Plus, the grease volume is good, so you can lubricate gears, axles, and other machinery with ease.
With its tight fittings and no-leak design, this grease gun is easy to use and provides a steady stream of lubricant without any mess.
This gun is packed with power and has plenty of pressure to push through stubborn fittings. Whether you’re a professional mechanic or just need to do some routine maintenance on your car, this greaser is up for the task.
How To Use Grease Gun?
Stop 1: Remove any old grease or dirt from the fitting.
The first thing you’ll need to do is remove any old grease or dirt from the fitting. If there’s too much build-up, you may need to use a wire brush or some other type of cleaning tool.
Stop 2: Lubricate the Fitting
Once the fitting is clean, apply a generous amount of lubricant to it. Make sure to get all sides of the fitting – this will help ensure a good seal and prevent leaks.
Stop 3: Insert Gun into Fitting
Carefully insert the gun into the fitting until it’s fully seated. You should feel resistance as you push it in – that means it’s properly attached and ready for use.
Make sure not to force it in if it doesn’t seem like it will fit – you could damage the fitting or gun if you do.
Stop 4: Spray Away!
Pull back on the trigger to start spraying lubricant, and then continue until the grease starts flowing freely from the nozzle. If there’s not enough pressure building up in front of your tip, remove it and check again for dirt build-up.
If everything is clear and clean, give it a try once more; chances are that this time some will come out properly. Once grease runs smoothly through your tubing (without any air bubbles), stop pulling on the trigger and keep an eye on where all of that lube ends up going – make sure it isn’t leaking onto anything important! When finished with use, we recommend you wipe down the gun and store it in a safe place.
Remember to always read and follow the safety instructions that come with your tools. And as always, when working with machinery or automotive parts – especially if you’re not familiar with them – consult an expert before getting started. Thanks for reading!