If you are looking for an article about how to break a chain without bolt cutters, then this is the one! We will be discussing 7 different ways to do so. Of course, there are other methods too. These are just some of the most common ones. Keep reading if you’re interested in learning more about breaking chains with ease!
How to Break a Chain Without Bolt Cutters
Way 1: Use a Hammer
You can easily break a chain if you have a hammer by hitting it in the middle. Be sure to aim for the weak spot in the middle of the links. This is the easiest way to break a chain without bolt cutters.
When you are smashing the links together, be sure to hit it several times. It might take you a few tries before your chain breaks, but this method is definitely possible.
Way 2: Use Channel Locks
Channel locks are very strong pliers that can break chains easily due to their jaw strength and size. If they do not fit around the link in question, try using them near where both ends of the lock meet.
Again, aim for the weak spot in between each link and use as much force as needed until your chain is broken into two pieces!
You should also consider wearing protective gloves when breaking chains because sometimes these tools slip out of place causing injury if held improperly or carelessly. The channel lock method works well on most types of chains, but it does not work on all of them.
Way 3: Use a Car Jack
If you happen to have a car jack lying around the house or garage, this is another easy way to break your bicycle chain without bolt cutters! You can place one end of the bike lock onto the ground and then slowly lift up with both hands until you feel resistance.
Then focus on pushing down as hard as possible to really put some force into breaking apart that link between each side of your bike lock.
This method might take several tries because sometimes people do not apply enough pressure when using their body weight against themselves in an attempt to flatten out those links.
Way 4: Cut It Off With Wire Cutters/Clippers
Wire cutters and clippers are great tools to have around the house because they can be used for a variety of different things. They work well when trying to break apart a chain link or two that is still attached together with another section not being broken by any other means.
This way, you do not need to worry about seeing your bike lock laying on the ground in pieces, but instead it will look as if someone tried cutting through it without much success which might deter thieves from stealing anything at all!
Way 5: Use an Angle Grinder/Disc Cutter
An angle grinder or disc cutter can both be very effective ways of breaking apart chains after attaching them between your bicycle frame and front tire.
The discs come out quite fast so it is important to be aware of your surroundings and who or what might be in the way when using this method. If you are not comfortable with using an angle grinder, it is best to leave this job for the professionals!
Way 6: Use a hacksaw
A hacksaw can easily cut through a chain-link, but it takes time and patience to do so correctly. It’s definitely not the quickest way to break apart a bike lock, but if you have the right tools and some extra time on your hands, then go for it!
Make sure that you saw all the way through each individual link otherwise. It will be very difficult to get past the padlock next time.
Way 7: Cut With Duct Tape/Cable Ties
If all else fails and you cannot find any other tools lying around the house, duct tape or cable ties can be used as makeshift saws to break apart a chain.
Simply wrap the tape tightly around each link and then use a sharp object (like scissors) to cut through the material. Cable ties work in a similar way, but make sure that they are tight so that they do not snap off prematurely!
These are just some of the ways that you can break a bicycle chain without bolt cutters. If you have any other suggestions or methods, feel free to share them in the comments below! And as always, stay safe when out on your bike!