If you need to change your bit but don’t know how then this blog post is for you! In this blog point, we will go over 7 simple steps on how to change drill bit on Makita hammer drill.

Many people have a Makita hammer drill. These drills are perfect for drilling holes in cement and masonry walls and driving screws into various materials. They come with a variety of different bits that you can use to do the job properly.

How to Change Drill Bit on Makita Hammer Drill

Step 1: Open the chuck of your hammer drill using the keyless chuck.

The first thing you will need to do is open up the chuck of your hammer drill. To do this, you should insert a key into the opening and turn it until it opens.

Step 2: Locate the drill bit you want to remove.

Once the chuck is open, locate the drill bit that you want to remove. Be sure to hold onto the drill bit tightly as you remove it from the chuck.

Step 3: Insert new drill bit into chuck.

Before inserting a new drill bit into the chuck, be sure to align it with the hammer drill. If it is not aligned correctly, it could cause damage to both the hammer drill and the new drill bit.

Step 4: Close Chuck of Hammer Drill using keyless chuck.

After inserting a new drill bit into the chuck, close it back up by turning it in a clockwise motion using the keyless chuck.

Step 5: Tighten the chuck.

Once the chuck is closed, use a wrench to tighten it by turning it in a clockwise motion. Do not over-tighten the chuck as this could damage both the hammer drill and the new drill bit.

Step 6: Drill!

After completing steps one through five, you are ready to start drilling again! Be sure to hold onto the drill bit tightly as you drill into whatever material you are working with.

Step 7: Release Chuck of Hammer Drill using keyless chuck.

When you are finished drilling, release the chuck by turning it in a counterclockwise motion using the keyless chuck. This will loosen the grip on the drill bit so that you can remove it from the chuck.

How To Take Care Of Your Drill Bits

Any drill bit can be damaged if it is not cared for properly. To take care of your drills, you should always use caution when drilling into hard materials such as steel and concrete since they could damage the drill bit’s tip.

Also, make sure to keep both your drill bits and hammer drill in good working condition by replacing worn-out parts immediately after noticing any defects or malfunctions.

Finally, avoid exposing either your hammer drill or new drill bits to extreme temperatures since this could cause them to warp while also reducing their lifespan dramatically. If you do notice that a new bit has warped during operation, remove it from the chuck and replace it with a brand-new one right away!

Moreover, if you are using a drill bit with a Makita hammer drill, it is important to know that several different types of bits are designed for specific purposes.

For example, suppose your work requires drilling into concrete or steel on a regular basis. In that case, you should consider purchasing carbide-tipped concrete and metal drill bits since they have been known for being extremely durable.

On the other hand, if your work involves woodworking projects like making furniture or cutting boards, then be sure to buy high-speed steel (HSS) spade wood drills that can easily cut through wood materials without wearing out quickly!

Be sure to always use caution when working with power tools. If you are unsure of how to complete any of the steps listed in this blog post, be sure to consult your hammer drill’s user manual or contact the manufacturer for assistance. Happy drilling!