If you are in the market for a new sander, but don’t have the cash to purchase one right now, then this blog post will be of interest. This blog post discusses how to change sandpaper on a Black and Decker sander.

You can pick up an older model at your local hardware store or garage sale for dirt cheap! Follow these 6 easy steps and learn how to change sandpaper on a Black and Decker sander so that you can get back to work doing what matters most- building things!

How To Change Sandpaper On A Black And Decker Sander

Step 1: Remove the old sandpaper sheet

The first thing you need to do is remove the old sandpaper sheet. This can be done by pulling it straight up out of the sander.

Step 2: Insert the new sandpaper sheet

Next, you will want to insert the new sandpaper sheet. The easiest way to do this is by folding it in half and then inserting it into the groove at the top of the sander.

Step 3: Secure the new sandpaper sheet

Once you have inserted the new sandpaper sheet, use your hands to secure it in place. You can do this by pressing down on each end of the sheet.

Step 4: Trim off any excess paper

If there is any excess paper hanging over the edge of the sander, use a pair of scissors to trim it off.

Step 5: Tighten up screws/bolts (if applicable)

If your Black and Decker sander has any screws or bolts that are loose, tighten them up now. You can do this by using a screwdriver to turn the appropriate screw/bolt in a clockwise direction until it is nice and tight.

Step 6: Turn on sander and test out new sandpaper sheet

Finally, you will need to turn your Black and Decker sander back on so that you can test out the new sandpaper sheet! Go ahead- give it a whirl!

Why Do You Need To Change Sandpaper On A Black And Decker Sander?

The main reason you need to change sandpaper on a Black and Decker sander is because it wears down over time. This means that the old sandpaper sheet needs to be replaced with a new one in order to continue getting the best results possible.

When To Change Sandpaper On A Black And Decker Sander?

How often you need to change sandpaper on a Black and Decker sander will depend on how often you use the sander, as well as the type of material you are sanding. In general, it is recommended that you change the sandpaper every few hours of use or when it becomes dirty. Now that you know how to change sandpaper on a Black and Decker sander, you can get back to work!

Tips On Changing Sandpaper On A Black And Decker Sander

Tip One:

Be careful not to tear the new sandpaper sheet when you are inserting it into the groove on the top of the sander.

Tip Two:

If your Black and Decker sander has screws or bolts that are loose, tighten them up before using the sander again. This will help keep the machine in good condition and prevent any damage from occurring.

Tip Three:

When sanding a large surface area, always change the sandpaper sheet midway through so that you get consistent results. This will help avoid any problems such as swirl marks on your workpiece.

Tip Four:

If the old sandpaper sheet is difficult to remove, try using a pair of pliers to grip it and pull it up out of the sander.

Tip Five:

Make sure that you store your Black and Decker sander in a dry place when not in use. This will help prolong the life of the machine.

When you are finished changing sandpaper on a Black and Decker sander, you can get back to work! By following these six easy steps, you will be able to change the paper with ease.