How to Lube Switches Without Desoldering: 6 Easy Steps

How to Lube Switches Without Desoldering

Lubricating switches is important for many reasons. For one, it will dramatically improve the feel of your keyboard. Switches are made to last much longer when they are lubricated properly.

If you’re reading this blog post, chances are that you’ve already thought about desoldering your switches and using a higher-quality switch plate or keycaps instead.

Though this is an option, it’s not necessarily the best one because there are other ways to lube switches without desoldering them first! In this blog post, we’ll discuss 6 easy steps for how to lube switches without desoldering them first!

How to Lube Switches Without Desoldering in 7 Steps

Step 1: Remove switch

The first thing you need to do is remove the switch from your keyboard. This can be done by prying open the case of the keyboard with a flathead screwdriver and removing any screws that hold in place. Once you have access, unscrew all bolts holding down switches until they are free.

Step 2: Cleaning Switches

Once you have removed them, it’s time for cleaning! You will want to clean off oil residue using acetone or alcohol wipes but don’t use too much as this may strip away paint on PCB boards if not cleaned properly. Ensure that there are no parts left before moving on to step three.

Step 3: Applying Lube

In a well-ventilated area, apply your desired lubricant to the switch using a small brush or syringe. Make sure that you get into all cracks and crevices. If you’re not sure how much lube to use, start with a small amount and add more if needed.

Step 4: Reassembly

Once the switches are sufficiently lubricated, it’s time for reassembly! Carefully place them back in their original positions before screwing them back down. Be mindful of wires and other delicate components while doing so.

Step 5: Testing Switches

Now it’s time to test out those newly lubed switches! Plugin your keyboard and press each key a few times to make sure that they are working as intended. If needed, repeat the lube process again.

Step 6: Enjoy!

Now you’re all done and ready to enjoy your newly lubricated keyboard! Feel free to show it off or brag about how much time and money you saved by not having a professional do it for you.

Lubing switches are a great way to save money and improve your keyboard. If you’re not sure how to do it, follow the steps in this blog post for how to lube switches without desoldering them first!

Suggested Post



Submit a Comment

Your email address will not be published. Required fields are marked *