Drill bits are really, really expensive. If you have a broken drill bit that is stuck in wood, it can be difficult to remove the broken drill bit without damaging your project or making it cost even more money to get another one.

However, there are some ways on how to remove a broken drill bit from wood with minimal damage and expense! This blog post will show you how!

How To Remove A Broken Drill Bit From Wood

With these 6 ways on how to remove a broken drill bit from wood, you’ll never have to be stuck with an unusable piece of junk again.

1. Use Vice Grips Or A Pliers To Grip The Drill Bit

If there’s not enough space or room where your old, broken drill bits are lodged, try attaching some vice grips or pliers onto the drill bit. Make sure you have a firm grip on the tool before attempting to twist it out of its place.

This method works best if your broken drill is stuck in an area that isn’t too wide or big, for example, inside small furniture joints. Don’t use any power tools or equipment, as this could potentially cause more damage than good!

2. Use A Dremel Tool To Cut The Drill Bit Out Of Wood

Using a Dremel tool can be very effective at cutting through smaller materials such as plywood and other thin surfaces where larger saws are unable to reach. Simply attach the sanding wheel onto your Dremel tool and start slowly working away at your old, broken drill bits until they’re all clear from wood.

If you need to use a Dremel tool on your broken drill bits, make sure you take extra precautions while using it. Wear protective gear such as goggles and gloves to avoid any accidents or injuries caused by the dust particles created during this process.

3. Use A Hammer To Tap The Drill Bit Out Of Wood

This method is not only effective but also simple enough for anyone to do at home! Place some tap into an adjacent piece of wood (preferably one with multiple layers), then get ready to hammer away.

It’s best if you’re able to apply pressure onto both sides of the board, so there’s more stability when removing old drill bits stuck inside wooden joints or surfaces. This way, they won’t move around too much, making it easier for you to remove them one by one.

4. Use A Rubber Band To Grip The Drill Bit And Remove It

This is one of the easiest ways on how to remove a broken drill bit from wood, especially if you’re working with smaller objects such as furniture joints. Simply place a rubber band onto your old and stuck drill bits then tie it tightly around both ends using some twine or rope. Make sure not to wrap too much material around them otherwise. This could potentially cause damage!

Once secured, use pliers or another gripping tool that’s similar in size and strength to pull the rubber bands off quickly, pulling out your broken drill bit along with it! This method works best for thin surfaces but can also be done effectively on larger surfaces without causing too much trouble.

5. Use A Wire Coat Hanger To Push The Drill Bit Out Of Wood

This is another simple and easy way on how to remove a broken drill bit from wood. Take your wire coat hanger, then bend it outwards at one end, creating a hook shape that will fit the size of your old drill bits. Once you’re ready, slip this end into any cracks or small openings where your stuck drill bit might be logged in, then use pliers to spin and twist it around until it’s completely removed!

Again, make sure not to apply too much pressure when using tools such as these otherwise, they could potentially cause more damage than good. This method works best for areas with larger gaps between wooden surfaces but can also work effectively on smaller objects without causing too many problems along the way.

6. Use a Drill To Remove A Broken Drill Bit From Wood

This method will only work if your old drill bits are stuck inside small joints or openings where larger saws can’t reach. Simply attach the drill bit onto any power tools that you have available, then slowly start drilling away at your broken drill until it’s completely removed from wood! Use some water to keep dust particles down while you’re drilling, so they don’t fly everywhere and cause damage.

Don’t use this technique on large surfaces as there is more potential for causing accidents, injuries, and even permanent damages than good. This method works best with smaller objects but could also be used effectively on bigger materials without too much trouble or risk involved along the way.

If you are stuck with a broken drill bit, it can feel like there’s no way out. Luckily, these methods are effective ways to remove a broken drill bit from wood, so don’t give up hope yet! You can also read our blog about making curved holes in wood and know what drill bit to use for plasterboard if you need holes in these materials.