How to Use a Titan 400 Paint Sprayer: 6 Basic Steps

How to Use a Titan 400 Paint Sprayer

People are always looking for new ways to save time, money and effort. One way you can do this is by using a Titan 400 paint sprayer. This article will teach you how to use one of these machines so that you can get your job done quickly and efficiently. Here are six basic steps on how to use a titan 400 paint sprayer.

What Is A Paint Sprayer?

A paint sprayer is a piece of equipment that allows you to quickly and efficiently cover large areas with paint. Paint sprayers work by atomizing the paint so it can be sprayed over an area, rather than brushing or rolling the paint on manually.

If you are painting anything from furniture to your house, using one of these will make sure everything looks great when finished since there’s no brush strokes left behind due to their ability for thorough coverage.

How to Use a Titan 400 Paint Sprayer in 6 Steps

Step 1: Set Up

Set up your paint sprayer by first putting on the air filter, then using the quick-connect coupling to attach it securely to a standard compressor. Use an adjustable wrench if one is included with your machine or you can use channel lock pliers for more leverage. Make sure that there are no leaks in this part of the system before continuing onto step two.

Step 2: Cleaning

Remove any old paint from inside and outside of the cup assembly. You may want to wipe out excess dust that might have settled into crevices as well because these pieces will be exposed during operation so they need to be clean at all times. This cleaning process should only take about five minutes once you get used to it, but don’t rush it as you don’t want to damage the equipment.

Step 3: Priming

The titan 400 paint sprayer must be primed before each use, even if it was just used a few minutes ago. Open the primer valve and hold the gun assembly about 12 inches from the surface you will be painting. Pump the handle until you see primer coming out of the nozzle, then release the trigger. Do this six times for each color you are using on your project.

Step 4: Loading Paint

Once the machine is primed, load your chosen paint into the cup assembly by pouring it in slowly and avoiding air bubbles as much as possible. Leave enough room at the top so that when you put on the lid there won’t be any spillage.

Step 5: Painting

Hold the gun assembly about 18-24 inches from the surface you are painting, and use smooth even strokes. Keep the gun moving at all times or you will end up with drips or runs. You don’t need to apply a lot of pressure when using this machine, it will do most of the work for you.

Step 6: Cleaning Up

Once your project is finished, it’s time to clean up your paint sprayer. Turn off the compressor and unplug the unit before disconnecting it from the quick-connect coupling. Remove the air filter and rinse both pieces off with water until all of the paint is gone. Let everything dry completely before putting everything back together for storage.

Tips On How To Use a Titan 400 Paint Sprayer

  • Clean the machine after every use to prevent any build-up of paint or dust.
  • Always prime the machine before each use, even if it was just used a few minutes ago.
  • Hold the gun assembly about 18-24 inches from the surface you are painting for the best results.
  • Use smooth even strokes when applying paint, and keep the gun moving at all times.
  • Disconnect the machine from the quick connect coupling once you’re finished painting.

These six basic steps on how to use a titan 400 paint sprayer should be enough to get you started on your next project. With a little practice, you’ll be able to finish faster and with fewer mistakes.

Suggested Post



Submit a Comment

Your email address will not be published. Required fields are marked *