Share
If you are a homeowner and recently experienced roof damage due to heavy rain, this article is for you. We’ll go through how to replace a soil stack, which can be done on your own! This article will provide an easy guide for DIY homeowners.
How to Replace a Soil Stack
Here are the steps on how to replace a soil stack:
Step One: Remove the Existing Soil Stack
The first step is to remove your soil stack. You need a shovel and safety goggles to do this because there may be sharp metal protrusions from old pipes.
Afterward, use an adjustable wrench to take off all of the joints until it’s completely detached from the ground and building! At that time, you’ll need to dig a hole that is about three feet deep and wide enough for the soil stack.
Step Two: Preparing New PVC Pipes
Next, attach one end of your new PVC pipe to the top of the old soil stack. Once this is done, you’ll need to take the other end and fit it into the bottom of your soil stack. This way, there will be something to attach onto when you’re ready for this stage!
Step Three: Test Out Soil Stack Connection
Before connecting the soil pipe together with PVC pipes that are now attached at both ends, test out whether or not it can hold the water pressure. To do this, pour a cup of water inside the soil pipe, and you’ll see if there are any leaks coming out from anywhere. If so, use epoxy to patch up those areas where they’re leaking!
Step Four: Attach PVC Pipes to Soil Stack Connection
Now that your soil stack can hold water pressure, attach your PVC pipes to the bottom of the soil stack connection. Make sure that it’s tight and secure so there won’t be any leaks coming from anywhere!
Step Five: Attach New Soil Stack into Ground
Finally, take your new soil stack and carefully place it back in its original spot where you originally dugout. Use a shovel to fill in the dirt back into the hole and pat it down firmly so that there won’t be any leaks coming from anywhere!
Congratulations! You have just finished replacing your soil stack with ease, which is an important step for homeowners who want to save money on plumbing costs by doing the task themselves instead of hiring someone to do it for them.
Additional Tips On How to Replace a Soil Stack
Here are the tips that can help you with your soil stack replacement:
- Always wear safety goggles when digging to prevent dirt from harming your eyes.
- Make sure to use epoxy in order to patch up any leaks that you may find within your soil pipe.
- Always make sure the connection between PVC pipes and soil stack are tightened securely so there won’t be any leaks coming from anywhere!
Reasons Why You Need To Replace the Soil Stack
A soil stack is also known as a vent pipe or rain pipe. The main purpose of this part in your home’s plumbing system is to allow wastewater and stormwater (which can contain leaves, twigs, stems, etc.) to flow through when it rains heavily instead of overflowing into your house.
If you notice cracks on top of the soil stack, it might be time for a replacement because these eventually cause leakage problems, which could lead to flooding inside your property! Also, if you have leakages from outside but they aren’t being drained properly, the soil stack most likely needs some attention!
When To Replace Your Current Soil Stack?
In many cases, homeowners would choose not to replace their current soil stack unless it’s damaged or already leaking. However, you should know that replacing the soil stack with no major issues is better since this can avoid future plumbing problems and repairs!
0 Comments