How to Use a Plumbing Snake in a Shower Drain: 6 Basic Steps

How to Use a Plumbing Snake in a Shower Drain

The shower drain is one of those parts of your home that you don’t really think about until it starts clogging up and flooding your bathroom. If this has happened to you, then the first thing that you should do is grab a plumbing snake.

A plumbing snake can be used for many purposes around the house, including clearing out a clogged shower drain! In this blog post, we will review how to use a plumbing snake in a shower drain by walking through 6 basic steps.

How to Use a Plumbing Snake in a Shower Drain

Here are the six most important things you need to do when using a plumbing snake in your shower drain.

Step 1: Prepare to use the snake

The first thing you need to do before using a plumbing snake in your shower drain is to prepare. Make sure that nobody will turn on the water while you are working with it, and also make sure there aren’t any children around who might get hurt if they touch the probe part of the tool. Also, place some plastic bags near the drain, and put some paper towels on a chair.

Step 2: Move the water away

The second thing to remember is that you need to move all of the water out of your drain and into a nearby sink. This will make it easier for you to work with the snake and make sure nobody gets hurt by standing in slippery liquid or falling on wet tile floors. Ensure everything is off before doing this step, including creating enough time so that no new hot water can come through while working.

Step 3: Inserting the snake wire

Once there isn’t any more standing liquid near your shower pan, insert your plumbing snake gently into the drain opening until at least two feet have gone down inside it. If there happens to be something large causing obstruction, such as hair clogs, be cautious while inserting the wire.

Step 4: Turn on water to flush out debris

After turning on your faucet, let it run for thirty seconds or so in order to allow the sewage line and pipes leading up towards your shower drain room to fill with water. Doing this will help loosen any blockage that may have occurred down there by flushing all of the hair clogs out into an easily accessible area where you can pull them out using pliers if necessary. Also, make sure nobody is standing near enough until you are certain that no more liquid will come through because otherwise, somebody might get wet again when everything goes back together!

Step 5: Remove obstructions from pipe

Once you’ve turned off the running water, insert the snake wire further down into your drain by two or three feet in order to remove any obstructions that are stuck. If there is something large enough causing an obstruction such as a clog of hair, use pliers to pull it out using this step.

Step 6: Turn on water again

Finally, when you’ve gotten rid of all obstructions and have flushed everything clean with the running faucet for thirty seconds or so, turn off the water one last time before turning it back on again. This final flushing process will ensure that no blockages remain, which could cause problems later on!

After following these six simple steps, you should be done clearing up shower drain issues without too much trouble at all! Removing obstructions from your shower drain with a plumbing snake can be completed in as few as ten minutes without too many problems.

Causes Of A Clogged Shower Drain

A clog in the shower drain can have different causes, and they may range from mild to severe. Water is generally expected to flow freely through a shower drain after each person uses the area for bathing or washing up, making clogging something that can catch people off guard if their drains are not maintained well enough.

There could be hair obstructions causing blockages in your shower drain, requiring you to use pliers to get rid of them. This should take no more than five minutes at most! Suppose there were larger items stuck inside, such as toys or other things children might put down. In that case, you will need to call a professional because otherwise, there’s an increased risk of sewage backflow occurring into your home due to the presence of any additional objects.

Another possible cause of a clogged shower drain is organic matter such as grease, soap scum, and oils. This could be due to the presence of hair conditioner or other substances along with these items, making it harder for water to continue flowing freely down your pipes like normal.

Clogs caused by this type of substance should at least take less than fifteen minutes in order to resolve when using a snake wire because they are not so severe unless there has been an excessive buildup over time.

Suggested Post



Submit a Comment

Your email address will not be published. Required fields are marked *